Honeywell GNS-XLS User Manual

Rev. 3
Sep/96
7-46
GNS-XLS Flight Management System AFIS Operation
AUTO WEATHER UPDATE
When the system is initialized,
the Automatic Weather Update
function will retain the status at
aircraft shutdown. The following
procedures allow the function to
be turned OFF and back ON.
TURNING AUTO WX UPDT
OFF
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select Key -
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
85)
3. ENTER Key - DEPRESS.
4. Line Select Key -
DEPRESS to position cur-
sor over ON option of
AUTO WX UPDT field.
(Figure 7-86)
5. BACK Key - DEPRESS.
OFF appears in the cursor.
(Figure 7-87)
6. ENTER Key - DEPRESS to
turn OFF the AUTO WX
UPDT function.
NOTE: A Weather Update
Request must be performed to
notify the GDC of the change in
status of AUTO WX UPDT.
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-85
AFIS OPERATING MODES
AUTO REPORT ON
AUTO WX UPDT ON
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-86
AFIS OPERATING MODES
AUTO REPORT ON
AUTO WX UPDT OFF
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-87

Honeywell GNS-XLS Specifications

General

Brand	Honeywell
Model	GNS-XLS
Category	Avionics Display
Language	English