Honeywell GNS-XLS - Turning Satellite Network off

7-51
GNS-XLS Flight Management System AFIS Operation
Rev. 3
Sep/96
TURNING SATELLITE NETWORK OFF
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select Key -
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
99)
3. ENTER Key - DEPRESS.
4. Line Select Key -
DEPRESS to position cur-
sor over ON option of SAT
(satellite) NETWORK field.
(Figure 7-100)
5. BACK Key - DEPRESS.
OFF? appears in the cursor.
6. ENTER Key - DEPRESS to
turn the satellite network
OFF. (Figure 7-101)
NOTE: The ACTIVE LINK
information at the bottom of the
page indicates the network that
is being serviced at that time. If
all networks are turned OFF or
none are operational, NONE will
be displayed.
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-99
AFIS OPERATING MODES
AUTO REPORT ON
AUTO WX UPDT ON
VHF NETWORK OFF
SAT NETWORK ON
ACTIVE LINK: SATCOM
>
>
>
Figure 7-100
AFIS OPERATING MODES
AUTO REPORT ON
AUTO WX UPDT ON
VHF NETWORK OFF
SAT NETWORK OFF?
ACTIVE LINK: NONE
>
>
>
Figure 7-101