Honeywell GNS-XLS - Initialization Review or Update

14. ENTER Key - DEPRESS.
If the field is blank the cur-
sor will move to TRANS-
MIT. Otherwise the cursor
will move to the second line
of free text. See Figure 8-
31.
15. INSERT up to 20 charac-
ters of text or leave the field
blank.
16. ENTER Key - DEPRESS.
The cursor will move to
TRANSMIT.
17. ENTER Key - DEPRESS to transmit diversion data via the data
link. The AFIS MENU Page will then be displayed.
NOTE: If a DATA LINK DISABLED message appears, the data link
is not available. Wait for TRANSMIT to appear or notify maintenance
of the problem.
INITIALIZATION REVIEW OR
UPDATE
1. AFIS Key - DEPRESS, if
necessary, to display the
AFIS MENU Page.
2. Line Select Key -
DEPRESS to position the
cursor over INITIALIZE.
See Figure 8-32.
3. ENTER Key - DEPRESS.
The INITIALIZE Page is
displayed. The AFIS initialization data can be modified at this
time. Refer to AFIS INITIALIZATION at the beginning of this
SYSTEM OPERATION section.
8-26
GNS-XLS FMS with Regional Airline AFIS
Rev 4
Sep/97
>
< >
DVT KLAX HOLD
REAS 25 REAS
FOB 1000 FOB
ETA 1120 EFC
FIRST LINE OF TEXT
SECOND LINE OF TEXT
TRANSMIT
20:18 DVT/HOLD
<
<
<
<
>
>
>
Figure 8-31
>
WGT/BAL INITIALIZE
STATION DVT/HOLD
WEATHER CLOSE OUT
DISPATCH
SEND MSG
DISPLAY MSG
20:09 AFIS MENU
<
><
<
< >
<
Figure 8-32