HH:MM UTC hours and minutes.
DVT: Enter up to four characters for the divert airport identifier.
REAS: The reason field consisting of four characters identifying the
reason for the diversion.
FOB: Enter up to four digits for fuel on board. The amount entered
is in pounds.
ETA: Estimated time of arrival. Enter two digits for hours and two for
minutes.
HOLD: This five character field is used to enter the hold airport iden-
tifier.
REAS: The reason field consisting of four characters identifying the
reason for the hold.
FOB: Enter up to four digits for fuel on board. The amount entered
is in pounds.
EFC: This is the expecting further clearance field. Enter two digits
for hours and two for minutes specifying the next expected time
release will granted.
Two lines of free text can be entered with a maximum of 20
alpha/numeric characters for each line.
TRANSMIT: Pressing ENTER with the cursor over TRANSMIT will
send the displayed data to the home base via the data link. DATA
LINK DISABLED will appear on this line if the data link is disabled
and the request will not be transmitted.
CLOSE OUT PAGE
This page allows the operator
to view data which will be used
to calculate flight time and
block time. See Figure 8-11.
HH:MM UTC hours and min-
utes.
FOB: This six character field
displays the fuel remaining or a
static display if a fuel value has
been entered.
8-10
GNS-XLS FMS with Regional Airline AFIS
Rev 4
Sep/97
>
><
>
<
< >
FOB 1000
OUT BLOCK
OFF FLT
ON
IN
TRANSMIT
20:19 CLOSE OUT
<
< >
Figure 8-11
To Next Page
Loading...
Need help?
General
