Honeywell GNS-XLS - To Insert a New Identifier; Updating Winds Aloft

7-64
GNS-XLS Flight Management System AFIS Operation
Rev. 3
Sep/96
TO INSERT A NEW IDENTIFIER
11. Line Select Key - DEPRESS to position the cursor over the iden-
tifier field.
12. IDENTIFIER - INSERT. The data text fields will go blank.
13. ENTER Key - DEPRESS. The TERMINAL WEATHER Menu
Page appears with the new identifier in place of the original iden-
tifier, and the cursor positioned at the location of the original iden-
tifier selected. If there is no data available for the new identifier, it
will appear in parentheses.
UPDATING WINDS ALOFT
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select Key -
DEPRESS to position cur-
sor over Option 4, WINDS
ALOFT. (Figure 7-137)
3. ENTER Key - DEPRESS to
display WINDS ALOFT
Menu Page.
4. Line Select Key -
DEPRESS to position cur-
sor in next available field.
(Figure 7-138)
NOTE: If desired, when no field
is available, place cursor over
existing identifier.
5. Desired Identifier - INSERT.
NOTE: Identifier can be VOR,
airport, waypoint, Lat/Lon or
VORTAC ident.
6. ENTER Key - DEPRESS.
The newly entered ID
appears in parentheses on
the Menu.
7. Repeat Steps (5) and (6) to enter additional requests.
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-137
KSNA (ENO)
KSTL (DQO)
(MKC)
TRANSMIT REQUEST?
TERMINAL WX
<
<
<
<
>
>
>
>
Figure 7-138