Honeywell GNS-XLS - Returning to AUTO REPORT

Rev. 5
Sep/97
7-55
GNS-XLS Flight Management System AFIS Operation
RETURNING TO AUTO REPORT
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select Key -
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
110)
3. ENTER Key - DEPRESS.
4. Line Select Key -
DEPRESS to position cur-
sor over OFF option of
AUTO REPORT field.
(Figure 7-111)
5. BACK Key - DEPRESS.
ON appears in the cursor.
6. ENTER Key - DEPRESS to
turn ON the AUTO
REPORT function. (Figure
7-112)
NOTE: If all ground networks
are OFF, then AUTO REPORT
will be OFF.
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-110
AFIS OPERATING MODES
>
>
>
AUTO REPORT OFF
AUTO WX UPDT ON
ARINC AUTO
SITA/AVICOM OFF
AIR CANADA AUTO
ACTIVE LINK: ARINC
Figure 7-111
AFIS OPERATING MODES
>
>
>
AUTO REPORT ON
AUTO WX UPDT ON
ARINC AUTO
SITA/AVICOM OFF
AIR CANADA AUTO
ACTIVE LINK: ARINC
Figure 7-112