Honeywell GNS-XLS - Returning to AUTO WX UPDT

RETURNING TO AUTO WX UPDT
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select Key -
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
88)
3. ENTER Key - DEPRESS.
4. Line Select Key -
DEPRESS to position cur-
sor over OFF option of
AUTO WX UPDT field.
(Figure 7-89)
5. BACK Key - DEPRESS.
ON appears in the cursor.
(Figure 7-90)
6. ENTER Key - DEPRESS to
turn ON the AUTO WX
UPDT function.
NOTE: A Weather Update
Request must be performed to
notify the GDC of the change in
status of AUTO WX UPDT.
7-47
GNS-XLS Flight Management System AFIS Operation
Rev. 3
Sep/96
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-88
AFIS OPERATING MODES
AUTO REPORT OFF
AUTO WX UPDT OFF
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-89
AFIS OPERATING MODES
AUTO REPORT OFF
AUTO WX UPDT ON
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-90