Honeywell GNS-XLS - Returning to AUTO Report;Auto Wx Update

Rev. 3
Sep/96
7-45
GNS-XLS Flight Management System AFIS Operation
RETURNING TO AUTO REPORT/AUTO WX UPDATE
1. AFIS Key - DEPRESS to display AFIS MENU Page.
2. Line Select Key - DEPRESS to
position cursor over Option 8,
OPERATING MODES.
(Figure 7-82)
3. ENTER Key - DEPRESS.
4. Line Select Key -
DEPRESS to position cur-
sor over OFF option of
AUTO REPORT or AUTO
WX UPDATE field. (Figure
7-83)
5. BACK Key - DEPRESS.
ON appears in the cursor.
(Figure 7-84)
6. ENTER Key - DEPRESS to
turn ON the AUTO
REPORT or AUTO WX
UPDATE function.
NOTE: If all networks are OFF,
then AUTO REPORT and
AUTO WX UPDATE will be
OFF.
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-82
AFIS OPERATING MODES
AUTO REPORT OFF
AUTO WX UPDT ON
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-83
AFIS OPERATING MODES
AUTO REPORT ON
AUTO WX UPDT ON
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-84