Honeywell GNS-XLS - Airport Analysis Review;Update

NOTE: If a DATA LINK DISABLED message appears, the data link
is not available. Wait for TRANSMIT to appear or notify maintenance
of the problem.
AIRPORT ANALYSIS
REVIEW/UPDATE
1. AFIS Key - DEPRESS, if
necessary, to display the
AFIS MENU Page. The
WGT/BAL field is not avail-
able and, therefore, is not
diplayed in the EMB120.
2. Line Select Key -
DEPRESS to position the
cursor over AIRPORT
ANALYSIS. See Figure 8-
64.
3. ENTER Key - DEPRESS.
The AIRPORT ANALYSIS
Page is displayed. See
Figure 8-65.
2. Line Select Key -
DEPRESS to position the
cursor in the AIRPORT
IDENT field.
3. INSERT the ICAO identifier
or verify the airport identifi-
er already displayed.
4. ENTER Key - DEPRESS.
The cursor will automatically move to the RUNWAY ID field.
5. INSERT the runway identifier.
6. ENTER Key - DEPRESS. The cursor will move to the TEMP C
field.
7. INSERT the current temperature. Enter a + or - followed by one
or two characters (if three digits are entered no + sign is entered),
or verify the temperature already displayed.
8. ENTER Key - DEPRESS. The cursor will move to the first line of
the free text field.
8-55
GNS-XLS FMS with Regional Airline AFIS
Rev 8
Apr/00
< >
AIRPORT ANALYSIS
<
<
<
<
>
AIRPORT IDENT KLAX
RUNWAY ID RW25R
TEMP C -25
FIRST LINE OF TEXT
TRANSMIT
Figure 8-65
>
20:09 AFIS MENU
<
><
<
< >
<
WGT/BAL CLOSE OUT
STATION INITIALIZE
WEATHER DVT/HOLD
DISPATCH
AIRPORT ANALYSIS
SEND MSG
DISPLAY MSG
Figure 8-64