3. ENTER Key - DEPRESS.
The STATION MENU Page
is displayed. See Figure 8-
82.
4. Line Select Key -
DEPRESS to position the
cursor in ETA field.
NOTE: The Line Select Keys
may be used at any time to
enter or change data.
5. INSERT the estimated time
of arrival in GMT, hours,minutes. This field may be left blank.
NOTE: Entry of an invalid time will result in the field blinking.
6. ENTER Key - DEPRESS. The cursor will automatically move to
the FUEL field.
7. INSERT a Y for yes if fueling will be needed. Insert an N for no if
fueling will not be needed.
8. ENTER Key - DEPRESS. The cursor will automatically move to
the LAV field.
9. INSERT a Y for yes if lavatory service will be needed. Insert an
N for no if lavatory service will not be needed.
10. ENTER Key - DEPRESS. The cursor will move to the DEICE
field.
11. INSERT a Y for yes if deicing will be needed. Insert an N for no if
deicing will not be needed.
12. ENTER Key - DEPRESS. The cursor will move to the GPU field.
13. INSERT a Y for yes if a ground power unit will be needed. Insert
an N for no if a ground power unit will not be needed.
14. ENTER Key - DEPRESS. The cursor will move to the DETAIL-
ING field
15. INSERT a Y for yes if detailing service will be needed. Insert an
N for no if detailing service will not be needed.
16. ENTER Key - DEPRESS. The cursor will move to the WIND-
SHIELD field.
8-64
GNS-XLS FMS with Regional Airline AFIS
Rev 8
Apr/00
20:21 STATION MENU
><
<
< >
<
>
>
>
ETA DETAILING
FUEL WINDSHIELD
LAV COMMISSARY
DEICE
GPU UM
WC A S
TRANSMIT
Figure 8-82
To Next Page
Loading...
