. . . . .
CONFIGURING MAXPRO NVR
Configuring the Sequences
MAXPRO NVR 3.1 Operator’s Guide 113
Configuring the Sequences
A sequence is a set of live video streamed one after the other from cameras for a specified
time interval. You can select the cameras or presets to be included in a sequence and also
specify the time interval for which the video from each camera or preset must be displayed.
Note: Presets must be defined for the cameras before including them in the sequence.
Creating a Sequence
You can create a sequence to display video that is captured from different cameras connected
to MAXPRO NVR.
Note: You can add a maximum of 50 sequences in MAXPRO NVR.
To create a sequence
1. Click the Configurator tab. The System page displays by default.
2. Click the Sequence tab to navigate to the Sequence page.
Figure 4-34 Sequence page
3. Click Add.
4. Under Details
•The Sequence Name appears by default. You can type a new Sequence Name as
applicable.
To Next Page
Loading...
