Honeywell MAXPRO - Adding Remaining Arecont Channels; Arecont Channels

. . . . .
CONFIGURING MAXPRO NVR
Configuring the Cameras
MAXPRO NVR 3.1 Operator’s Guide 97
8. Click Save. A message Do you want to add the remaining analog channels to the
system? is displayed at the bottom of the screen as shown below.
Figure 4-19 Adding Remaining Arecont channels
9. Click Yes to add the remaining analog channels. The list of channels associated with the
Arecont 360 camera is added in the Camera list as shown below. By default the Arecont
360 camera adds four channels under camera list.
Figure 4-20 Arecont Channels