. . . . .
MONITORING A SITE
Surrounding Cameras
MAXPRO NVR 3.1 Operator’s Guide 125
Surrounding Cameras
You can associate a camera to a group of cameras using the “Surrounding Cameras” feature.
This feature enables you to view video from a group of related cameras at the same time; for
example, when you want to view video from cameras located in the same area.
To define the surrounding cameras for a camera
1. Click the Viewer tab.
2. Click on the toolbar on the top of the salvo layout. The surrounding cameras salvo
layout appears.
3. Select the camera for which you want to associate a group of cameras from the Devices
window. You need to drag and drop the camera in the central panel of the salvo layout.
The panel starts displaying video from the camera.
4. From the Site window, select the cameras you want to associate with the camera
selected in the previous step. The panel starts displaying video from the cameras.
5. Click to save the surrounding cameras salvo layout.
Switching to the Surrounding Camera View for a
Camera
• Click on the toolbar. The surrounding cameras salvo layout appears. Select the
camera from the Site window. The surrounding cameras salvo layout starts displaying
video from the camera and the associated cameras.
Or
• Hover the mouse over the panel displaying video from the camera. A panel toolbar
appears. Click in the panel toolbar. The surrounding cameras salvo layout starts
displaying video from the camera and the associated cameras.
To Next Page
Loading...
Need help?
General
