MAXPRO NVR WEB CLIENT
Introducing Web Client
178 MAXPRO NVR 3.1 Operator’s Guide
7
Logging on to MAXPRO NVR Web Client
To log on to MAXPRO NVR Web Client
1. Type the URL https://<MAXPRO NVR Server IP or Machine/Computer
name>/MAXPROWEB/ in your web browser and then press Enter. The login page
appears.
Note: <MAXPRO NVR Server IP or Computer/Machine name> needs to be replaced by
the IP address or computer/machine name (as applicable) of the MAXPRO NVR
Server machine on which both the Web Server and NVR Server are installed by
default.
Figure 3-3 MAXPRO NVR Login page
Note: If Silverlight is not installed on your machine then a message
is displayed. If you are using Internet connection then you
can click the link Get Microsoft Silverlight to download the Silverlight. See
Prerequisites to access MAXPRO NVR Server through Web Client section to
install Silverlight.
2. Type your Username. The default user name is “admin”.
3. Type your Password. The default password is “trinity”.
To Next Page
Loading...
Need help?
General
