. . . . .
CONFIGURING MAXPRO NVR
Performing User Administration
MAXPRO NVR 3.1 Operator’s Guide 117
Note:
•“X” indicates that the user’s role has access to the privilege.
•“-” indicates that the user’s role does not have access to the privilege.
• The Internet Operator role is optimized for remote monitoring at lower
bandwidths (minimum bandwidth requirements still apply to be able to
stream required video data)
• The Live View Operator role can only access live video, and does not have
access to playback operations.
When you install MAXPRO NVR for the first time, a default user named “admin” is created. The
admin user is assigned the role “NVRAdministrator”. Only the user having “NVRAdministrator”
privilege can add new users, assign roles to the added users, add or modify the privileges to
the users, and perform various configurations in MAXPRO NVR.
Adding a User
You can add a user by providing a unique user name and a password. Only the “NVR
Administrator role” user can add a new user in MAXPRO NVR. You can add up to 1024 users
in MAXPRO NVR. After you add a new user, you can assign a role to it.
To add a user
1. Click the Configurator tab. The System page displays by default.
2. Click the User tab to navigate to the User page.
Figure 4-35 User page
3. Click Add. A new row is created with a default set of values for the user.
4. Under the User Name column, the default user name is displayed. You can type a new
user name as applicable.
5. Under the User Description column, type a description for the user.
To Next Page
Loading...
Need help?
General
