Honeywell MAXPRO - MAXPRO NVR Web Client Features

. . . . .
MAXPRO NVR WEB CLIENT
MAXPRO NVR Web Client Features
MAXPRO NVR 3.1 Operator’s Guide 183
MAXPRO NVR Web Client Features
MAXPRO NVR Web Client features includes viewing live video, playback, taking snapshots
and viewing presets.
Live Video
You can view live video using the option available in MAXPRO NVR web client. The panels in
the salvo layout display video. You can select the video source from cameras on the Live
Video pane.
Note: To view the list of cameras in Live video pane, you should configure the cameras
in MAXPRO NVR. See Configuring the Cameras section. The list of cameras listed
is based on the user or operator permissions configured in the MAXPRO NVR.
To view live video
• Drag and drop the required video source from the Live video pane on a panel in the
salvo layout.
Figure 3-6 Web Client - Live Video
Troubleshooting Tip
If the video is not streaming through web client then perform the below steps to reset Internet
Explorer (browser) to default settings except user specific settings like favorites, bookmarks
etc:
1. In Internet Explorer navigate to Tools -> Internet Options -> Advanced tab and then
click the Reset button. The Reset Internet Explorer Settings dialog box appears.
2. Select ‘Delete personal settings’ check box and then click the Reset button.