LOGGING ON AND FAMILIARIZATION
Logging on Using Profiles
44 MAXPRO NVR 3.1 Operator’s Guide
3
2. In the User menu, , click Profiles and select Set Default Profile. The profile is
set as the default profile. The default profile appears selected in the Profile box in the Log
On dialog box.
Figure 3-3 Setting the Default Profile
Modifying a Profile
You can modify the profile name and the server address saved in the profile.
To m od if y a pr of il e
1. In the client workstation, double-click the icon on the desktop to display the Log On
dialog box.
2. Click Server Settings. The Server Settings dialog box appears.
3. In the Choose Profile box, select the profile you want to modify. The profile details
appear under Configuration in the Server Settings dialog box.
4. Change the Profile Name as applicable.
5. Change the Server IP/Name as applicable.
6. Click Save.
7. Click OK. The profile is modified.
Deleting a Profile
To d el et e a pr of il e
1. In the client workstation, double-click the icon on the desktop to display the Log On
dialog box.
2. Click Server Settings. The Server Settings dialog box appears.
3. In the Choose Profile box, select the profile you want to delete.
4. Click Remove.
To Next Page
Loading...
Need help?
General
