Honeywell MAXPRO User Manual

CONFIGURING MAXPRO NVR
Configuring the Cameras
96 MAXPRO NVR 3.1 Operator’s Guide
4
Figure 4-18 Adding Arecont 360 Model Camera
5. In the Advanced Discovery Settings pane, type the User Name and Password of the
Arecont 360/180 camera.
Or
By default the username and password configured in the camera is considered.
Note: The default user name is admin and password is admin.
6. Click Apply.
7. In the Discover cameras here area, click Add to add the camera.

Honeywell MAXPRO Specifications

General

Video Compression	H.264
Video Output	HDMI, VGA
Operating System	Embedded Linux
Network Interface	10/100 Mbps Ethernet
USB Ports	2 USB 2.0 ports
Remote Access	Web browser
Recording Resolution	Up to 1080p
Alarm Input/Output	4 Input
Power Supply	12VDC
Channels	4, 8, 16
Audio Input/Output	1 audio input, 1 audio output