. . . . .
CONFIGURING MAXPRO NVR
Configuring the Cameras
MAXPRO NVR 3.1 Operator’s Guide 85
8. Click Save. A new FLIR series camera is added as shown below.
Figure 4-10 Saving FLIR Camera
Adding RTSP Cameras/Encoders
Real Time Streaming Protocol (RTSP) is a control protocol for streaming video over the
Internet. It allows you to select the TCP or UDP based streaming modes depending upon
what the camera supports. For the camera type “Generic RTSP”, you must specify the
following RTSP settings.
Figure 4-11 RTSP Settings
• Type the RTSP URL. Click for help on RTSP URLs format that can be assigned
to different camera types.
To Next Page
Loading...
