CONFIGURING MAXPRO NVR
Configuring the Cameras
84 MAXPRO NVR 3.1 Operator’s Guide
4
4. Type the required Camera Name.
5. Type the IP Address of the camera as shown in figure.
Note: The IP address should include the Port number 8081. For example if the IP
address is 111.221.0.333 then you should add the port number (8081) as
111.222.0.333:8081.
6. Select the required FLIR Series model camera from the Camera Type drop-down list as
shown below (for example FLIR F-Series).
Figure 4-9 Adding FLIR Model Camera
7. Scroll right to manually type the User Name and Password.
Note: The default user name is admin and password is admin.
To Next Page
Loading...
