CONFIGURING MAXPRO NVR
Overview
68 MAXPRO NVR 3.1 Operator’s Guide
4
Overview
The MAXPRO NVR configuration task is performed only by the user having the “NVR
Administrator” role. This is the initial task performed after the setting up the MAXPRO NVR
system.
Note: For a user having the “Operator” role, the contents in this chapter serve as a
reference.
MAXPRO NVR configuration involves the following tasks:
• Configuring the System settings
• Configuring the Disk settings
• Configuring the Cameras
• Adding IP Cameras / Encoders
• Configuring the Advanced Discovery Settings
• Discovering and Adding Third Party PSIA, ONVIF and AXIS Cameras
• Discovering and Adding Multi-channel Encoders
• Adding FLIR Camera
• Adding RTSP Cameras/Encoders
• Configuring the Input and Output for an IP camera
• Configuring 360/180 Cameras
• Managing Analog Cameras
• Configuring Analog Cameras
• Configuring the Input and Output for an Analog camera
• Server VMD (Smart VMD)
• Updating the Cameras
• Deleting the Cameras
• Configuring the Schedules
• Configuring the Sequences
• Performing User administration
To Next Page
Loading...
