LOGGING ON AND FAMILIARIZATION
Port Forwarding
48 MAXPRO NVR 3.1 Operator’s Guide
3
• Controller Port: 26026
• Storage Engine IP: 199.63.245.84
• Storage Engine Port: 10000
Note: In these scenarios, as ports are not mapped in the router, you can connect to
only one MAXPRO NVR from an external MAXPRO NVR Client.
Logging off
You can log off from MAXPRO NVR from the User menu. The name of the currently logged in
user is displayed as the User menu on the top right of each screen.
To log off from MAXPRO NVR
1. Click the User menu, . The user menu options appear.
2. Click Log Off. The Logon dialog box appears after logging off from MAXPRO NVR.
Closing the MAXPRO® NVR User Interface
You can close the MAXPRO NVR user interface from the User menu. The name of the currently
logged in user is displayed as the User menu on the top right of each screen.
To close the MAXPRO NVR
1. Click the User menu, . The user menu options appear.
2. Click Exit. A dialog box appears prompting you to confirm the action.
3. Click Yes.
To Next Page
Loading...
Need help?
General
