Honeywell MAXPRO - Panomorph Settings in the Viewer

. . . . .
MONITORING A SITE
Video Viewing Options from Immervision Enabled Cameras
MAXPRO NVR 3.1 Operator’s Guide 129
Panomorph Settings in the Viewer
At any point of time, while viewing video in a particular mode, you can switch to a different
mode using the Panomorph settings available in the Viewer.
To view video in different modes
• Right-click the panel displaying live vide, point to Panomorph Settings, and then select
one of the modes (PTZ Mode/Quad Mode/Perimeter Mode) as applicable.
Figure 5-5 Panomorph Settings in the Viewer