Honeywell MAXPRO - Adding Remaining Axis Channels; AXIS Channels

CONFIGURING MAXPRO NVR
Configuring the Cameras
94 MAXPRO NVR 3.1 Operator’s Guide
4
8. Click Save. A message Do you want to add the remaining analog channels to the
system? is displayed at the bottom of the screen as shown below.
Figure 4-16 Adding Remaining Axis Channels
9. Click Yes to add the remaining channels. The list of channels associated with the camera
is added in the Camera list as shown below.
Figure 4-17 AXIS Channels