MAXPRO NVR WEB CLIENT
MAXPRO NVR Web Client Features
186 MAXPRO NVR 3.1 Operator’s Guide
7
Viewing Presets
Preset can be viewed in web client if the camera is a PTZ camera. To view Presets in web
client you need to define the presets in MAXPRO NVR. To configure presets in MAXPRO NVR,
see Creating a Sequence section.
To View Presets
1. Hover the mouse at the bottom of a panel over live video. A tool bar appears.
Figure 3-8 Web Client - Presets
2. Click and then select the required preset from the drop-down list to
view the configured preset.
Note: To view Presets in web client you need to define the presets in MAXPRO NVR.
See Creating a Sequence section.
Taking a Snapshot
You can take snapshot of the single video panel in a salvo and also all video panels in a salvo.
Note: Snapshot feature is not supported on Mac and print screen feature in Mac can be
used alternatively.
To take a snapshot of all the video panels in a salvo
To Next Page
Loading...
