Honeywell MAXPRO - Creating Self Signed Certificate

. . . . .
MAXPRO NVR WEB CLIENT
MAXPRO NVR Web Client Features
MAXPRO NVR 3.1 Operator’s Guide 187
1. Click on the rightmost pane of the web page. A confirmation message appears.
Figure 3-9 Confirmation dialog - All Salvo Views
2. Click OK to save the snapshot.
To take snapshot of the single video panel
1. Hover the mouse at the top of a panel over a live a video. A tool bar appears.
2. Click the icon. A confirmation message appears
Figure 3-10 Confirmation dialog - Single Video Panel
3. Click OK to save the snapshot.
Creating Self Signed Certificate
Self signed certificate is required if you want to access the MAXPRO NVR server using your
domain name. You should create a certificate, bind it to the https and then install the certificate
to access the server using the web browser (Internet Explorer, Chrome, Firefox and Safari).
To create self signed certificate
1. Open the Internet Information Manager (IIS) window.
2. Select the server node under Connections pane.
3. Under IIS, double -click the Server Certificate option as shown below.