. . . . .
MONITORING A SITE
Alarms
MAXPRO NVR 3.1 Operator’s Guide 165
Freeze stop receiving the new or unacknowledged
alarms in the Alarm window. You can click
this command again to start receiving the
alarms. This feature is useful when the Alarm
window contains many unacknowledged
alarms and it becomes difficult to manage
them. You can stop receiving the alarms
momentarily and start receiving again when
needed.
Clear on Ack automatically clear the alarms when they are
acknowledged.
Receive Alarms Only list only the alarms in the Alarm window.
Alarms are listed only when the severity level
of the corresponding event that triggered the
alarm is greater than or equal to the alarm
severity threshold value. See Setting
Preferences section for more information.
Receive Events Only list only the events in the Alarm window.
Events whose severity level is greater than or
equal to the alarm severity threshold value
are listed. See Setting Preferences section for
more information.
Receive Both Alarms and Events to list both alarms and events in the Alarm
window.
Command Click to....
To Next Page
Loading...
Need help?
General
