. . . . .
MAXPRO NVR WEB CLIENT
Introducing Web Client
MAXPRO NVR 3.1 Operator’s Guide 173
2. Server Configuration
System Configuration tab: The system configuration tab allows you to:
• update the administrator user credentials used by the web server. By default , admin
is the username and trinity is the password. It is recommended not to change the
default settings.
Note: You can update only the Administrator credentials used by Web Server only. The
Administrator credentials used by the Web Server should be configured as a non-
Windows Administrator user in the MAXPRO NVR through the desktop client.
• allows you to enable the PTZ operations for cameras from web client. It is not
recommended to use this feature in the current release.
• allows you to select the FPS for a better Stream quality. It is recommended not to
change the default settings.
• select the protocol for secure communication. The available options are HTTP and
HTTPS. By default HTTP is set .
Server Configuration tab: The server configuration tab allows you to update the Web Server
and MAXPRO NVR Server IP details.
To set the Web Configurator
1. Double-click on the desktop. The MAXPRO Web Configurator dialog box appears.
Figure 3-1 MAXPROWebConfigurator
Note: By default the System Configuration tab is selected.
To Next Page
Loading...
