Honeywell MAXPRO - Page 209

. . . . .
APPENDIX A
MAXPRO Mobile App
MAXPRO NVR 3.1 Operator’s Guide 209
4. Set up the MAXPRO NVR.
•In the Name field, enter the name of the unit to which you wish to connect.
•In the IP Address field, type the address of the unit.
•Click Save.
5. The name and IP address of the NVR populates. Tap the name to enable the NVR (check
mark displays).
6. To return to the log on dialog:
Apple mobile device Android mobile device
Tap Setup in the top left hand corner. Tap the cog wheel in the top left hand
corner.
Apple mobile device Android mobile device
Tap Setup.Tap the Back arrow.