Honeywell MAXPRO User Manual

. . . . .
APPENDIX B
MAXPRO®NVRs - AXIS Camera/Encoders Discovery and Configuration (using ONVIF)
MAXPRO NVR 3.1 Operator’s Guide 245
2. Click Setup and then navigate to System Options > ONVIF. The User List dialog box
appears.
3. Click the Add button. The ONVIF User Setup dialog box appears.
4. Type the user name and password in the respective boxes.
5. Confirm the password and then click OK. The newly added user is displayed in the User
List box.

Honeywell MAXPRO Specifications

General

Video Compression	H.264
Video Output	HDMI, VGA
Operating System	Embedded Linux
Network Interface	10/100 Mbps Ethernet
USB Ports	2 USB 2.0 ports
Remote Access	Web browser
Recording Resolution	Up to 1080p
Alarm Input/Output	4 Input
Power Supply	12VDC
Channels	4, 8, 16
Audio Input/Output	1 audio input, 1 audio output