I
-
A
I
-
(m]
/
Softkay
Reference
A
Softkey
used to select tuned receiver measurement of input A.
See “Measuring Devices with Your Network Analyzer” in Chapter 3 for more
information on input A.
A/R
Softkey
in narrowband internal menu. Selects tuned receiver reflection
measurement A/R.
See “Measuring Devices with Your Network Analyzer” in Chapter 3 for more
information on measuring A/R.
Abort
Softkey
in (HARDCOPY) menu. Stops sending data from the network analyzer
to the hardcopy device.
NOTE
Hardcopy devices with large buffers may continue to operate for quite a while after this command. To
stop such devices immediately, turn off power to the hardcopy device.
9-4
I-
To Next Page
Loading...
