I
-
I
-
E
Edit
Edit
limit
Edit Limit
MinJMax
(Option
lC2,
IBASIC,
on&)
Softkey
in
BASIC
menu. Displays the
IBASIC
edit
menu and a rudimentary word and character editor.
See the HP Instrument BASIC User’s Handbook for more information.
Access Keys:
(,SYSTEM
OPTIONS)
IBASIC
Softkey
in limit line menu. Displays menu to change the frequency or
amplitude of previously entered limits, or add a data trace marker.
Access Keys:’
(-J
Limit Hsnu
Softkey
in marker limit menu. Displays a menu to set the maximum and
minimum limits on the selected marker limit test.
See “lb Use Marker Limit Functions” in Chapter 4 for more information.
Access Keys: (DISPLAY)
L&it
M@w
Mkr
‘Limits
Softkey
in the
(W)
menu. Adjusts the electrical delay to balance the
phase of the DUT. It simulates a variable length
lossless
transmission line,
which can be added to or removed from a receiver input to compensate for
interconnecting cables, etc. This function is similar to the mechanical or
analog “line stretchers” of other network analyzers. Delay is annotated in
units of time with secondary labeling in distance for the current velocity
factor.
Softkey
in add max line and add min line menus. Sets the end (or stop)
frequency of a limit line.
See “Using Limit Lines” in Chapter 4 for more information on limit lines.
Access Keys: (DISPLAY) Limit
#sxxu
Add limit hdd
HZ%X
Lifts
m
Add
Kin
Line
9-24
I-
To Next Page
Loading...
