HP 8712C - Page 420

I
-
I
-
(HARDKEY) I Softkey Reference
H
Ep 8712c
Softkey in HP-IB menu. Sets actual HP-IB address of the network analyzer.
Default HP-II3 address is 16. This setting is not affected by [PRESET) or
Add=@ ss power-on.
Access Keys: (SYSTEM OPTIONS) HP-IB
HP 871&j
Softkey in HP-II3 menu. Sets actual HP-IB address of the network analyzer.
Default HP-IB address is 16. This setting is not affected by (-1 or
Addrerss power-on.
Access Keys: ~SYSTEM OPTIONS) HP-IB
HP-TB
Softkey in [SYSTEM OPTIONS) menu. Displays menu to set the HP-IB address
of network analyzer, set and change network analyzer HP-h3 status, and set
HP-II3 echo feature.
HEJP-IB E&o
Softkey in HP-II3 menu. When on, displays HP-IB mnemonics on screen as
keys are pressed, a convenient way to see the mnemonics associated with the
*a OFF keys.
Not all keys (especially those that display menus) have mnemonics.
Access Keys: CSYSTEM OPTIONS) HP-II3
Hue Softkey in the custom colors menu. Use this key to customize the colors of
display items on your external monitor. Values accepted for hue are 0 to 99.
Zero represents red, and the approximate color progression from there is:
orange, yellow, green, cyan, blue, magenta and back to red.
See “Using an External VGA Monitor” in Chapter 4 for more information.
9-35
_I
I-