I
-
I
-
@iGiEiF’
I
SoPtkey Reference
S
Start
Softkey
in two menus:
lFREQl
and
(j-1.
1. In
IFREQ)
menu, sets the start frequency of source. Minimum frequency is
300
kHz.
When start is selected, the other frequency parameter is stop.
See “Entering Measurement Parameters” in Chapter 2 for more
information.
2. In
[HARDj
menu, starts print or plot as set in select copy port menu.
See “Printing and Plotting Measurement Results” in Chapter 4 for more
information.
Start
(Option
lC2,
IBASIC,
on@
Softkey
in secure menu.
L&e
#
See the HP Instrument BASIC User’s Handbook for more information.
Sta;trt
Softkey
in
[POWERL)
menu. Sets starting point (in
dBm)
for a power sweep
power
measurement.
PWWI~
Sweep
in
[W’
menu must be selected before
setting the start and stop power points.
See Power
%reep
entry in this chapter for more information on the power
sweep function.
$ta-I&ties
Softkey
in marker math menu. Measures a user-defined segment of a
measurement trace and calculates the frequency span, mean, and standard
deviation of the amplitude response, and the peak-to-peak ripple.
See “To Use Marker Math Functions” in Chapter 4 for more information.
Step
(Option
ICZ,
IBASIC,
on&)
Softkey
in
IBASIC
menu. When a program is
ready to run, this
softkey
steps through the program one line at a time. Good
de-bugging tool.
See the
HP
Instrument BASIC User’s Handbook for more information.
Access Keys: (SYSTEM OPTIONS)
IBASIC
9-77
To Next Page
Loading...
