HP ProCurve 2650

6-3
Interface Access, System Information, and Friendly Port Names
Interface Access: Console/Serial Link, Web, and Inbound Telnet
Interface Access: Console/Serial Link,
Web, and Inbound Telnet
Interface Access Features
In most cases, the default configuration is acceptable for standard operation.
Note Basic switch security is through passwords. You can gain additional security
using IP authorized managers. However if unauthorized access to the switch
through in-band means (Telnet or the web browser interface), then you can
disallow in-band access (as described in this section) and install the switch in
a locked environment.
Feature Default Menu CLI Web
Inactivity Time 0 Minutes
(disabled)
page 6-4 page 6-6 —
Inbound Telnet Access Enabled page 6-4 page 6-5 —
Outbound Telnet Access n/a — page 6-6 —
Web Browser Interface Access Enabled page 6-4 page 6-6 —
Terminal type VT-100 — page 6-6 —
Event Log event types to list
(Displayed Events)
All — page 6-6 —
Baud Rate Speed Sense — page 6-6 —
Flow Control XON/XOFF — page 6-6 —
!Software.book Page 3 Thursday, October 10, 2002 6:10 PM