To Next Page

To Previous Page

D-3

MAC Address Management

Determining MAC Addresses

Menu: Viewing the Switch’s MAC Addresses

The Management Address Information screen lists the MAC addresses for:

■ Base switch (default VLAN; VID = 1)

■ Any additional VLANs configured on the switch.

Also, the Base MAC address appears on a label on the back of the switch.

Note The Base MAC address is used by the first (default) VLAN in the switch. This

is usually the VLAN named “DEFAULT_VLAN” unless the name has been

changed (by using the VLAN Names screen). On the Switch 4108GL, the VID

(VLAN identification number) for the default VLAN is always “1”, and cannot

be changed.

To View the MAC Address (and IP Address) assignments for VLANs

Configured on the Switch:

1. From the Main Menu, Select

1. Status and Counters

2. Switch Management Address Information

If the switch has only the default VLAN, the following screen appears. If

the switch has multiple static VLANs, each is listed with its address data.

Figure D-1. Example of the Management Address Information Screen

Switch Base (or Default

VLAN) MAC address

Current IP Address

Assigned to the Switch

!Software.book Page 3 Thursday, October 10, 2002 6:10 PM

Other manuals for HP ProCurve 2650

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2650 and is the answer not in the manual?

General