To Next Page

To Previous Page

4-7

Using the HP Web Browser Interface

Tasks for Your First HP Web Browser Interface Session

Tasks for Your First HP Web Browser

Interface Session

The first time you access the web browser interface, there are three tasks that

you should perform:

■ Review the “First Time Install” window

■ Set Manager and Operator passwords

■ Set access to the web browser interface online help

Viewing the “First Time Install” Window

When you access the switch’s web browser interface for the first time, the

Alert log contains a “First Time Install” alert, as shown in figure 4-2. This gives

you information about first time installations, and provides an immediate

opportunity to set passwords for security and to specify a Fault Detection

policy, which determines the types of messages that will be displayed in the

Alert Log.

Double click on First Time Install in the Alert log (figure 4-1 on page 4-6). The

web browser interface then displays the “First Time Install” window, below.

Figure 4-2. First-Time Install Window

!Software.book Page 7 Thursday, October 10, 2002 6:10 PM

Other manuals for HP ProCurve 2650

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2650 and is the answer not in the manual?

General