HP ProCurve 2650

12-2
Multimedia Traffic Control with IP Multicast (IGMP)
Overview
Overview
This chapter describes the following features and how to configure them with
the switch’s built-in interfaces:
■ Multimedia Traffic Control with IP Multicast (IGMP): Use the
switch to reduce unnecessary bandwidth usage on a per-port basis by
configuring IGMP controls.
For general information on how to use the switch’s built-in interfaces, see:
■ Chapter 2, “Using the Menu Interface”
■ Chapter 3, “Using the Command Line Interface (CLI)”
■ Chapter 4, “Using the HP Web Browser Interface
■ Chapter 5, “Switch Memory and Configuration”
!Software.book Page 2 Thursday, October 10, 2002 6:10 PM