To Next Page

To Previous Page

6-4

Interface Access, System Information, and Friendly Port Names

Interface Access: Console/Serial Link, Web, and Inbound Telnet

Menu: Modifying the Interface Access

The menu interface enables you to modify these parameters:

■ Inactivity Time-out

■ Inbound Telnet Enabled

■ Web Agent Enabled

To Access the Interface Access Parameters:

1. From the Main Menu, Select...

2. Switch Configuration...

1. System Information

Figure 6-1. The Default Interface Access Parameters Available in the Menu Interface

2. Press (for E

dit). The cursor moves to the System Name field.

3. Use the arrow keys ([v], [^], [<], [>]) to move to the parameters you want

to change.

Refer to the online help provided with this screen for further information

on configuration options for these features.

4. When you have finished making changes to the above parameters, press

, then press (for S

ave).

Interface Access

Parameters

!Software.book Page 4 Thursday, October 10, 2002 6:10 PM

Other manuals for HP ProCurve 2650

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2650 and is the answer not in the manual?

General