HP ProCurve 2650

B-28
Monitoring and Analyzing Switch Operation
Port and Static Trunk Monitoring Features
Web: Configuring Port Monitoring
To enable port monitoring:
1. Click on the Configuration tab.
2. Click on .
3. To monitor one or more ports.
a. Click on the radio button for Monitor Selected Ports.
b. Select the port(s) to monitor.
4. Click on .
To remove port monitoring:
1. Click on the Monitoring Off radio button.
2. Click on .
For web-based Help on how to use the web browser interface screen, click on
the button provided on the web browser screen.
!Software.book Page 28 Thursday, October 10, 2002 6:10 PM