To Next Page

To Previous Page

5-8

Switch Memory and Configuration

Using the Menu and Web Browser Interfaces To Implement Configuration Changes

How To Reset the startup-config and running-config Files to the

Factory-Default Configuration. This command reboots the switch,

replacing the contents of the current startup-config and running-config files

with the factory-default startup configuration.

Syntax: erase startup-config

For example:

Figure 5-3. Resetting to the Factory-Default Configuration

Press to replace the current configuration with the factory default config-

uration and reboot the switch. Press to retain the current configuration and

prevent a reboot.

Using the Menu and Web Browser

Interfaces To Implement Configuration

Changes

The menu and web browser interfaces offer these advantages:

■ Quick, easy menu or window access to a subset of switch configuration

features (See the “Menu Features List” on page 2-14 and the web browser

“General Features” list on page.)

■ Viewing several related configuration parameters in the same screen, with

their default and current settings

■ Immediately changing both the running-config file and the startup-config

file with a single command

Menu: Implementing Configuration Changes

You can use the menu interface to simultaneously save and implement a subset

of switch configuration changes without having to reboot the switch. That is,

when you save a configuration change in the menu interface, you simulta-

neously change both the running-config file and the startup-config file.

HPswitch(config)# erase startup-config

Configuration will be deleted and device rebooted, continue [y/n]?

!Software.book Page 8 Thursday, October 10, 2002 6:10 PM

Other manuals for HP ProCurve 2650

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2650 and is the answer not in the manual?

General