HP ProCurve 2650 User Manual

13-2
802.1w Rapid Spanning Tree Protocol (RSTP) and 802.1d Spanning Tree Protocol (STP)
Overview
Overview
STP Features
802.1d Spanning Tree
Protocol
Default Menu CLI Web
viewing the STP
configuration
n/a page 13-19 page 13-10 —
enable/disable STP disabled page 13-19 page 13-23 page 13-41
reconfiguring general
operation
priority: 32768
max age: 20 s
hello time: 2 s
fwd. delay: 15 s
page 13-19 page 13-24
reconfiguring per-port STP path cost: var
priority: 128
mode: norm
page 13-19 page 13-25
monitoring STP n/a page B-17 page B-17 n/a
802.1d Spanning Tree
Protocol
Default Menu CLI Web
Viewing the RSTP/STP
configuration
-- page 13-16 page 13-10 n/a
enable/disable RSTP/STP
(RSTP is selected as the
default protocol)
disabled page 13-16 page 13-11 page 13-18
reconfiguring whole-switch
values
Protocol Version: RSTP
Force Version:
RSTP-operation
Switch Priority: 8
Hello Time: 2 s
Max Age: 20 s
Forward Delay: 15 s
page 13-16 page 13-12 n/a
reconfiguring per-port
values
Path Cost:
Depends on port
type
Priority: 8
Edge Port: Yes
Point-to-point:
Force-true
MCheck: Yes
page 13-16 page 13-14 n/a
!Software.book Page 2 Thursday, October 10, 2002 6:10 PM

HP ProCurve 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	2
Jumbo Frame Support	Yes
Form Factor	Rack-mountable
VLAN Support	Yes
Layer 3 Routing	No
PoE Support	No
Fanless	No
Altitude	Up to 3, 000 meters
Management	CLI, SNMP
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	15% to 95% non-condensing