14-2
HP Procurve Stack Management
Overview
Overview
This chapter describes how to use your network to stack switches without the
need for any specialized cabling—page 14-3.
For general information on how to use the switch’s built-in interfaces, see:
■ Chapter 2, “Using the Menu Interface”
■ Chapter 3, “Using the Command Line Interface (CLI)”
■ Chapter 4, “Using the HP Web Browser Interface
■ Chapter 5, “Switch Memory and Configuration”
!Software.book Page 2 Thursday, October 10, 2002 6:10 PM
To Next Page
Loading...
