2-15
Using the Menu Interface
Where To Go From Here
Where To Go From Here
This chapter provides an overview of the menu interface and how to use it.
The following table indicates where to turn for detailed information on how
to use the individual features available through the menu interface.
Option: Turn to:
To use the Run Setup option Refer to the Installation and Getting Started Guide
shipped with the switch.
To use the HP Procurve Stack Manager Chapter 14, “HP Procurve Stack Management”
To view and monitor switch status and
counters
Appendix B, “Monitoring and Analyzing Switch
Operation”
To learn how to configure and use
passwords and other security features
Refer to the Access Security Guide for your
switch.
To learn how to use the Event Log “Using the Event Log To Identify Problem
Sources” on page C-21
To learn how the CLI operates Chapter 3, “Using the Command Line Interface
(CLI)”
To download software (the OS) Appendix A, “File Transfers”
For a description of how switch
memory handles configuration
changes
“Switch Memory and Configuration” on page 5-1
For information on other switch
features and how to configure them
See the Table of Contents at the front of this
manual.
!Software.book Page 15 Thursday, October 10, 2002 6:10 PM
To Next Page
Loading...
Need help?
General
