HP ProCurve 2650 User Manual

10-29
Configuring for Network Management Applications
CDP
CDP-Capable Hubs. Some hubs are capable of running CDP, but also
forward CDP packets as if the hub itself were transparent to CDP. Such hubs
will appear in the switch’s CDP Neighbor table and will also maintain a CDP
neighbor table similar to that for switches. For more information, refer to the
documentation provided for the specific hub.
Troubleshooting CDP Operation. Turn to “Using the Event Log To Identify
Problem Sources” on page C-21.
!Software.book Page 29 Thursday, October 10, 2002 6:10 PM

HP ProCurve 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	2
Jumbo Frame Support	Yes
Form Factor	Rack-mountable
VLAN Support	Yes
Layer 3 Routing	No
PoE Support	No
Fanless	No
Altitude	Up to 3, 000 meters
Management	CLI, SNMP
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	15% to 95% non-condensing