14-14
HP Procurve Stack Management
Configuring Stack Management
4. Move the cursor to the Stack State field by pressing (for Edit). Then
use the Space bar to select the
Commander option.
5. Press the down arrow key to display the Commander configuration fields
in the Stack Configuration screen.
Figure 14-7. The Default Commander Configuration in the Stack Configuration
Screen
6. Enter a unique stack name (up to 15 characters; no spaces) and press the
down arrow key.
7. Ensure that the Commander has the desired
Auto Grab setting, then press
the down arrow key:
• No (the default) prevents automatic joining of Candidates that
have their
Auto Join set to Yes.
• Yes enables the Commander to automatically take a Candidate
into the stack as a Member if the Candidate has
Auto Join set to Yes
(
the default Candidate setting) and does not have a previously
configured password.
8. Accept or change the transmission interval (default: 60 seconds), then
press to return the cursor to the
Actions line.
9. Press (for
Save) to save your configuration changes and return to the
Stacking menu.
Your Commander switch should now be ready to automatically or manually
acquire Member switches from the list of discovered Candidates, depending
on your configuration choices.
!Software.book Page 14 Thursday, October 10, 2002 6:10 PM
To Next Page
Loading...
Need help?
General
