HP ProCurve 2650

14-22
HP Procurve Stack Management
Configuring Stack Management
To remove a Member from a stack, use the Stack Management screen.
1. From the Main Menu, select:
9. Stacking...
4. Stack Management
You will then see the Stack Management screen:
Figure 14-13. Example of Stack Management Screen with Stack Members Listed
2. Use the down arrow key to select the Member you want to remove from
the stack.
Figure 14-14. Example of Selecting a Member for Removal from the Stack
3. Type (for
Delete) to remove the selected Member from the stack. You
will then see the following prompt:
Figure 14-15. The Prompt for Completing the Deletion of a Member from the Stack
Stack Member List
For status descriptions,
see the table on page
14-46.
!Software.book Page 22 Thursday, October 10, 2002 6:10 PM