To Next Page

To Previous Page

A-4

File Transfers

Downloading Switch Software

Menu: TFTP Download from a Server to Primary Flash

Note that the menu interface accesses only the primary flash.

1. In the console Main Menu, select Download OS to display this screen:

Figure A-1. Example of the Download OS Screen (Default Values)

2. Press (for E

dit).

3. Ensure that the Method field is set to TFTP (the default).

4. In the TFTP Server field, type in the IP address of the TFTP server in which

the switch software file has been stored.

5. In the Remote File Name field, type the name of the switch software file.

If you are using a UNIX system, remember that the filename is case-

sensitive.

6. Press , then (for eX

ecute) to begin the switch software download.

The following screen then appears:

Figure A-2. Example of the Download OS Screen During a Download

!Software.book Page 4 Thursday, October 10, 2002 6:10 PM

Other manuals for HP ProCurve 2650

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2650 and is the answer not in the manual?

General