HP ProCurve 2650 User Manual

B-20
Monitoring and Analyzing Switch Operation
Status and Counters Data
Figure B-14. Example of VLAN Listing for the Entire Switch
Listing the VLAN ID (VID) and Status for Specific Ports.
Figure B-15. Example of VLAN Listing for Specific Ports
Listing Individual VLAN Status.
HPswitch> show vlan
Status and Counters - VLAN Information
VLAN support : Yes
Maximum VLANs to Support : 9
Primary VLAN: DEFAULT_VLAN
802.1Q VLAN ID Name Status
-------------- -------------- --------
1 DEFAULT _VLAN Static
33 VLAN-33 Static
44 VLAN-44 Static
HPswitch> show vlan ports A1-A2
Status and Counters - for ports A1,A2
802.1Q VLAN ID Name Status
-------------- -------------- --------
1 DEFAULT _VLAN Static
33 VLAN-33 Static
Because ports A1
and A2 are not
members of VLAN-
44, it does not appear
in this listing.
!Software.book Page 20 Thursday, October 10, 2002 6:10 PM

HP ProCurve 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	2
Jumbo Frame Support	Yes
Form Factor	Rack-mountable
VLAN Support	Yes
Layer 3 Routing	No
PoE Support	No
Fanless	No
Altitude	Up to 3, 000 meters
Management	CLI, SNMP
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	15% to 95% non-condensing