HPE FlexFabric 5950 Series

152
Syntax
ip forwarding-table save filename filename
Views
Any view
Predefined user roles
network-admin
Parameters
filename filename: Specifies the name of a file, a string of 1 to 255 characters. For information about
the filename argument, see Fundamentals Configuration Guide.
Usage guidelines
The command automatically creates the file if you specify a nonexistent file. If the file already exists,
this command overwrites the file content.
To automatically save the IP forwarding entries periodically, configure a schedule for the device to
automatically run the ip forwarding-table save command. For information about scheduling a task,
see Fundamentals Configuration Guide.
Examples
# Save the IP forwarding entries to the fib.txt file.
<Sysname> ip forwarding-table save filename fib.txt